Water pressure barrels of correct installation method

Pure water storage and discharge of purified water containers. The larger the configuration model, the more water storage will be, and the more water will be supplied daily. However, the pressure bucket is prone to rupture due to the water pressure and the uncertainty of the water pressure. The larger the model is, the greater the chance of internal damage, and the correct installation method can improve this situation.

In the previous article, we introduced the types of pressure buckets, which are plastic, iron and plastic coated steel. The water pressure of different buckets is different, and the pressure of 0.5-0.7kg (3.2g, 6G pressure barrel, etc.) can be set in the ordinary small product, and the large scale should be set according to the actual situation!

What is the correct way to install the pressure bucket? A lot of people think that according to the manufacturer's setting, there will be four convex points facing down, and then there is the correct way to control the ball valve. There are also some people who believe that putting pressure tanks horizontally will reduce the pressure needed to get out of the water, make the water flow more convenient, and improve the service life of the product. These methods are true for small (3.2G, 6G) configurations, but for large (11G or more) pressure buckets, using this type of installation will have the opposite effect!

The pressure bucket is stored in the internal tank, which controls the flow of water through the water pressure. Small products because of their own small amount of water, small pressure, any installation method can be used. But more than 11G of the force bucket, only the inverted installation, the direction of the control ball valve is the correct installation method, also can better use. To understand here, feed water pressure need not provide pressure bucket, so dress inversion are no problem, but the water is need internal pressure to perform, if handstand installed, the water itself is in a state of to downstream, open control ball valve, can let the water out very smoothly, use this kind of installation method can also increase the outflow of water, also have very good maintenance effect to the product itself.

A little pressure bucket, a lot of use skills. During the installation, good maintenance of the product. Very simple installation method to the product use and life have very good effect!